OUT OF THE THE BOX – 6.1 DOUBLE ENDER 6.1 x 21 x2 11/16 35.5
This board was a chop down of one of my Little Pirate models. It has a concave all the way through the guts and is punctuated by a short deepish vee out the tail. The rails have a little bulk in them as do the traditional double enders. The nose rocker is minimized but that is subsidised with more tail lift.
With a little lean toward some of Neil Purchase Juniors designs I thought this board deserved a 2+1 option. The bigger alpha single fin can be moved up close to the front fins if warranted in order to get maximum pivot in the waves where there is not much wall going on.
In quad mode this board will surf like the Pirate since it shares the DNA ,which will provide plenty of speed and manoeuvrability .
This particular board would float a guy from 80 to 90 kilos. I have given the board a bit of a retro look with a loose type rail spray and the inclusion of my old Pipedream decals.
Muzz
![Working with Muzz on the second carbon wrap was pretty cool, and the outcome for the HP-EPS (High Performance – EPS) […]](http://www.bourtonshapes.com/wp-content/uploads/2016/06/TalkinHP-80x40.jpg "The HP EPS Report With Troy Brooks"){kind=small}
![Perhaps you could call this board a real hybrid in the true sense of the word. It certainly looks like […]](http://www.bourtonshapes.com/wp-content/uploads/2016/05/IMG_0318-80x40.jpg "THE EPS DIXI SPOON"){kind=small}
![I have been spending a lot of time designing high performance hybrids to make in EPS the last few years […]](http://www.bourtonshapes.com/wp-content/uploads/2016/01/HPEPS960x540.jpg "EPS HIGH PERFORMANCE."){kind=small}
![The very first Frieken Flyer I made was for myself to surf with my grandkids in tiny surf .I went […]](http://www.bourtonshapes.com/wp-content/uploads/2015/08/960x540.jpg "EPS FRIEKIN Flyer"){kind=small}
![Roughly 6 years ago I designed a Boot Model range which were a bunch of really small wide boards that […]](http://www.bourtonshapes.com/wp-content/uploads/2015/02/bobby-5_edited-1-copy.jpg "EPS BOBBY DAZZLER"){kind=small}
![The new EPS Mach 3 is designed off the Mach 3 PU, but wider and thicker, however still retains a […]](http://www.bourtonshapes.com/wp-content/uploads/2015/01/EPS-M-3-PROFILE.jpg "EPS MACH 3 FIVE FINNER"){kind=small}
![The Silver Bullet was created back in 2009 and has become my best seller. Due to its popularity I gave […]](http://www.bourtonshapes.com/wp-content/uploads/2011/12/SAM_0626.jpg "THE SILVER BULLET"){kind=small}
![Mach 2 – 2015 Update The Mach 2 has been a solid staple from the day Brooko and I hatched […]](http://www.bourtonshapes.com/wp-content/uploads/2015/08/mac2.jpg "THE MACH 2"){kind=small}
![Like every successful design, its evolution just continues! I am not into just milking a design until it is dead. […]](http://www.bourtonshapes.com/wp-content/uploads/2014/11/SAM_09002.jpg "2015 SKINNY BULLET"){kind=small}
![LONGBOARDERS . PASS THIS UP AT YOUR PERIL !!!! The 5 year success of the Bullet series has been a […]](http://www.bourtonshapes.com/wp-content/uploads/2013/08/missilebanner.jpg "THE MISSILE"){kind=small}
![One would by now, have had to had his head in the sand the last year, if he were to […]](http://www.bourtonshapes.com/wp-content/uploads/2012/12/hprt5x700.jpg "THE HPRT5"){kind=small}
![Ever since Dane came out with the Diver Dumpster and Kelly his Wizard Sleeve; the concept of the normal thruster […]](http://www.bourtonshapes.com/wp-content/uploads/2012/05/VictimBanner1.jpg "THE FASHION VICTIM"){kind=small}
![THE PSEUDO FISH 2012 I remember way back in 92 watching a vid shot by Martin Daley up in the […]](http://www.bourtonshapes.com/wp-content/uploads/2011/12/PseduoFish-Back-80x40.jpg "THE PSEUDO FISH"){kind=small}
![The Twinza design made a brief appearance during the demise of the twin fin era- in a vain attempt to […]](http://www.bourtonshapes.com/wp-content/uploads/2017/02/twbanner650x370v2-80x40.jpg "THE TWINZAA"){kind=small}
![The world of surfboard design is from my point of view a very predicable beast punctuated at rare intervals by […]](http://www.bourtonshapes.com/wp-content/uploads/2016/09/Snub637x365-80x40.jpg "THE SNUB FEEDER"){kind=small}
![The Baby Bat to my way of seeing things was looking somewhat outdated- time to discard the nappies, and although […]](http://www.bourtonshapes.com/wp-content/uploads/2015/12/FIBat.jpg "THE THOROUGHLY MODERN BAT"){kind=small}
![The Little Zappa has been one of my star performing designs the last 6 years and I thought was worthy […]](http://www.bourtonshapes.com/wp-content/uploads/2013/11/SAM_0911.jpg "2015 LITTLE ZAPPER"){kind=small}
![The Bottom Feeder has been one of my most successful thrusters to date, only it has not been successful for […]](http://www.bourtonshapes.com/wp-content/uploads/2014/11/SAM_08891.jpg "THE STUB FEEDER"){kind=small}
![Of late there has been interest in a more parallel type of planshape. An extreme example of this can be […]](http://www.bourtonshapes.com/wp-content/uploads/2014/06/stinger.jpg "THE STINGER"){kind=small}
![Perhaps it is the environment that I have been designing for that has some influence on this design; and that […]](http://www.bourtonshapes.com/wp-content/uploads/2013/02/Pban.jpg "THE LITTLE PIRATE"){kind=small}
![THE FAT BULLET The Fat Bullet is a hybrid in the true sense of the word; a mix of the […]](http://www.bourtonshapes.com/wp-content/uploads/2012/01/fatbuldeck-80x40.jpg "THE FAT BULLET"){kind=small}
![The slick has been a stalwart of my tri fin range for more than half a decade and has seen […]](http://www.bourtonshapes.com/wp-content/uploads/2016/07/Slick-80x40.jpg "The Modern Slick"){kind=small}
![First of all there is a story behind the name of this model which probably needs to be explained before […]](http://www.bourtonshapes.com/wp-content/uploads/2012/05/fangpic11.jpg "THE PICK POCKET"){kind=small}
![THE BOTTOM FEEDER The goal with the Bottom feeder is to appeal to the surfer who has ignored the fish […]](http://www.bourtonshapes.com/wp-content/uploads/2011/12/BottomFeeder-Back-80x40.jpg "THE BOTTOM FEEDER"){kind=small}
![This Step Up model is a modern day replacement of my Indo Gun model which has been a perennial in […]](http://www.bourtonshapes.com/wp-content/uploads/2015/02/STEP-UP-DECK.jpg "THE STEP UP"){kind=small}
![This design however specialized it is, has been the surprise package of my line up the last few years. Indeed […]](http://www.bourtonshapes.com/wp-content/uploads/2015/01/NEW-TAMER-PROFILE.jpg "LEDGE TAMER V2"){kind=small}
![THE BAT TAILED QUAD TOW Originally I made this board for Ry Craike for up north WA four or 5 […]](http://www.bourtonshapes.com/wp-content/uploads/2012/01/tow1-80x40.jpg "THE BAT TAILED QUAD TOW"){kind=small}
![THE SKINNY BULLET The skinny bullet is basically the fat bullet on a diet. It is narrower and thinner. Again […]](http://www.bourtonshapes.com/wp-content/uploads/2011/12/SkinnBullet-Back-80x40.jpg "THE SKINNY BULLET"){kind=small}
![THE REEF SWALLOW The swallow tail the last 15 years has been relegated in most minds as a tail for […]](http://www.bourtonshapes.com/wp-content/uploads/2011/12/ReefSwallow-Back-80x40.jpg "THE REEF SWALLOW"){kind=small}
![THE LEDGE TAMER Murray Bourton is no stranger to the power of reef breaks all around the world and is […]](http://www.bourtonshapes.com/wp-content/uploads/2011/12/LedgeTamer-Back-80x40.jpg "THE LEDGE TAMER"){kind=small}
![Even though I have been all over Indo for the past 35 years I have never done the Telos and not […]](http://www.bourtonshapes.com/wp-content/uploads/2018/05/shape1-80x40.jpg "OUR TRIP OF A LIFETIME"){kind=small}
![For the month of June I’ve taken 20% OFF the Slop Rod & Black Knight Models. Dont tell anyone though […]](http://www.bourtonshapes.com/wp-content/uploads/2018/05/pd-80x40.jpg "Pipedream Sale 20% Off"){kind=small}
![AUSTRALIA’S BEST SHAPERS SERIES Murray is as part of the surfboard shaping masters as you can get. After his start […]](http://www.bourtonshapes.com/wp-content/uploads/2016/12/articleimage-80x40.jpg "Coastal Watch Interview"){kind=small}